Start // Fiber Optics // Fiber Couplers / Collimators // Coupler // Amagnetic Laser Beam Coupler by Schäfter + Kirchhoff - 60SMS-1-4-RGBV11-47-Ti

60SMS-1-4-RGBV11-47-Ti

Amagnetic Laser Beam Coupler

60SMS-1-4-RGBV11-47-Ti
60SMS-1-4-RGBV11-47-Ti
60SMS-1-4-RGBV11-47-Ti
60SMS-1-4-RGBV11-47-Ti
60SMS-1-4-RGBV11-47-Ti

Features

High precision amagnetic fiber coupler optimized for high pointing stability and long-term stability. Efficient coupling of collimated laser radiation into single-mode and PM fiber cables.
  • Focal length 11 mm
  • Optics type: Triplet optics, Apochromatic
  • AR-Coating: 400 - 700 nm
  • Inclined coupling axis, FC-APC connection
  • System mount Ø 19.5 mm
  • Titanium design

Description

The laser beam coupler series 60SMS is designed for compact and long-term stable coupling of singlemode laser radiation into a singlemode or polarization-maintaining fiber. For multimode applications please use the series 60FC-A19.5 fiber couplers.

The features of the coupler type 60SMS include:

Optics
The RGBV optics (achromats and even apochromats) with focal length 11 mm is designed for optimum multiple wavelength coupling by minimizing the chromatic focal shift for all wavelengths from 400 to 700 nm. It is AR-coated from 400 - 700 nm. It is corrected for spherical aberrations and designed in such a way that it leads to a diffraction-limitedspot with an M2 < 1.05. Refocussing for wavelengths 400 - 700 nm is not necessary. It is not suitable for UHV applications.

High long-term stability
It‘s compact size as well as the high-resolution alignment mechanisms allow for a straight-forward, intuitive coupling procedure.The result is a fiber coupling with high thermal stability, pointing stability, that is vibration and shock-insensitive. Long-term stability tests (see figure on the right) have shown a power stability better than 3 % for a temperature range of 15 - 35 °C.

6 Degrees of freedom*
In order to achieve optimum coupling efficiency the fiber coupler needs to provide certain degrees of freedom. You need to adjust the angle between laser beam and lens/fiber end-face, the z-position of the lens, adjust the polarization axis of the fiber to that of the laser source and center the lens with respect to the laser beam. The fiber coupler provides all degrees of freedom necessary. It has a TILT adjustment, an independent focus adjustment, can be rotated 360°, and allows for lateral adjustment* using e.g the adapter 60A19.5-F.

The TILT adjustment is used to maximize the lateral overlap between the mode field of the fiber and the focussed laser spot using 3 adjustment screws. 3 locking screws are used for fine-adjustment and to lock the position for an optimum mechanical stability.

Independent to the TILT adjustment, the distance between fiber end-face and coupling optics is adjusted by means of an eccentric key. The final focus setting is locked by means of two radially arranged clamping screws. Since the focus adjustment is independant, the z-position of the mode field diameter can be placed much more precisely.

The polarization alignment of the fiber to the polarization axis of the laser source is performed by rotating the laser beam coupler. The separation of the fiber coupler and the adapter necessary for centering is essential to allow for a full 360° freedom of rotation. The coupler has a tight-fit cylinder that can be placed into a 19.5 mm receptacle of a corresponding adapter.

The beam can be centered with respect to the aperture of the coupling optics using e.g. the adapter 60A19.5-F.

Optimum lens performance
The angled polish of connectors of type APC causes the beam to exit in an angle and not parallel to the optical axis of the fiber. This is corrected by the pre-angled mechanical coupling axis of the coupler. that compensates the beam deflection and you can use the lens centrically. This minimizes aberrations simply resulting from a non-ideal beam path through the lens.

Connector Type
The fiber coupler is equipped with a FC-APC type receptacle. Because of the spring-loaded fiber ferrule the fiber coupler has an additional grub screw to increase pointing stability.

Material
The fiber coupler type 60SMS is made from amagnetic titanium. The relative permeability is near 1 (µr = 1.00005) making it almost transparent to magnetic fields. The linear coefficient of thermal expansion is close to that of the optics so that a thermal stability over a larger temperature range can be expected.

Technical data

60SMS-1-4-RGBV11-47-Ti

Series
60SMS
Order Code
60SMS-1-4-RGBV11-47-Ti
Focal length
11 mm
AR coating
47
Wavelength range
400 - 700 nm
Lens type
Triplet optics
Correction
Apochromatic
Numerical aperture
0.18
Clear aperture
4 mm
Connector type
FC-APC
Outer diameter
Ø 25 mm
Length
23 mm
Tilt adjustment
Yes
System mount
Ø 19.5 mm
Housing material
Titan
Weight
26 g
UHV compatible
No
Suitable for multimode
No
Note
Dimensions (for a complete dimensional drawing please refer to the downloads section)

Downloads

Benefits of user registration include

  • Extended information for download including stepfiles, software or manuals
  • Direct download of user-specific downloads (e.g. user-specific software)
  • Access to previous online requests and the possibility to add complete previous lists to the "Request for quote" list
  • Stored item list
Click here to register.

Accessories

9D-12
Screwdriver WS 1.2
50HD-15
Hex key WS 1.5
60EX-4
Eccentric key with a stroke of ± 0.5 mm.
60A19.5-F
Adapter for 60SMS Laser Beam Couplers Flange mount 1"x1"
Polarization Analyzer SK010PA

Measurement tool for coupling into polarization-maintaining fiber cables