Start // Fiber Optics // Fiber Couplers / Collimators // Coupler // Laser Beam Coupler by Schäfter + Kirchhoff - 60SMS-SMA-23-M6.2-33

60SMS-SMA-23-M6.2-33

Laser Beam Coupler

60SMS-SMA-23-M6.2-33
60SMS-SMA-23-M6.2-33
60SMS-SMA-23-M6.2-33
60SMS-SMA-23-M6.2-33

Features

High precision fiber coupler optimized for high pointing stability and long-term stability. Efficient coupling of collimated laser radiation into single-mode and PM fiber cables.
  • Focal length 6.2 mm
  • Optics type: Doublet optics, Achromatic
  • AR-Coating: 390 - 670 nm
  • Inclined coupling axis, F-SMA connection
  • System mount Ø 19.5 mm

Description

The laser beam coupler series 60SMS is designed for compact and long-term stable coupling of singlemode laser radiation into a singlemode or polarization-maintaining fiber. For multimode applications please use the series 60FC-A19.5 fiber couplers.

The features of the coupler type 60SMS include:

Optics
The achromat with focal length 6.2 mm is designed for coupling multiple wavelengths. It is AR-coated from 390 - 670 nm. It is corrected for spherical aberrations and designed in such a way that it leads to a diffraction-limited spot with an M2 < 1.05. Additionally it is corrected for chromatic aberration so that there are certain wavelengths or wavelength ranges where the focal length does not vary significantly. It is not suitable for UHV applications.

High long-term stability
It‘s compact size as well as the high-resolution alignment mechanisms allow for a straight-forward, intuitive coupling procedure.The result is a fiber coupling with high thermal stability, pointing stability, that is vibration and shock-insensitive. Long-term stability tests (see figure on the right) have shown a power stability better than 3 % for a temperature range of 15 - 35 °C.

6 Degrees of freedom*
In order to achieve optimum coupling efficiency the fiber coupler needs to provide certain degrees of freedom. You need to adjust the angle between laser beam and lens/fiber end-face, the z-position of the lens, adjust the polarization axis of the fiber to that of the laser source and center the lens with respect to the laser beam. The fiber coupler provides all degrees of freedom necessary. It has a TILT adjustment, an independent focus adjustment, can be rotated 360°, and allows for lateral adjustment* using e.g the adapter 60A19.5-F.

The TILT adjustment is used to maximize the lateral overlap between the mode field of the fiber and the focussed laser spot using 3 adjustment screws. 3 locking screws are used for fine-adjustment and to lock the position for an optimum mechanical stability.

Independent to the TILT adjustment, the distance between fiber end-face and coupling optics is adjusted by means of an eccentric key. The final focus setting is locked by means of two radially arranged clamping screws. Since the focus adjustment is independant, the z-position of the mode field diameter can be placed much more precisely.

The polarization alignment of the fiber to the polarization axis of the laser source is performed by rotating the laser beam coupler. The separation of the fiber coupler and the adapter necessary for centering is essential to allow for a full 360° freedom of rotation. The coupler has a tight-fit cylinder that can be placed into a 19.5 mm receptacle of a corresponding adapter.

The beam can be centered with respect to the aperture of the coupling optics using e.g. the adapter 60A19.5-F.

Optimum lens performance
The angled polish of connectors of type APC causes the beam to exit in an angle and not parallel to the optical axis of the fiber. This is corrected by the pre-angled mechanical coupling axis of the coupler. that compensates the beam deflection and you can use the lens centrically. This minimizes aberrations simply resulting from a non-ideal beam path through the lens.

Connector Type
The fiber coupler is equipped with a F-SMA type receptacle.

Material
The fiber coupler type 60SMS is made from nickel silver (standard)

Technical data

60SMS-SMA-23-M6.2-33

Series
60SMS
Order Code
60SMS-SMA-23-M6.2-33
Focal length
6.2 mm
AR coating
33
Wavelength range
390 - 670 nm
Lens type
Doublet optics
Correction
Achromatic
Numerical aperture
0.2
Clear aperture
2.5 mm
Connector type
F-SMA
Outer diameter
Ø 25 mm
Length
25.7 mm
Tilt adjustment
Yes
System mount
Ø 19.5 mm
Housing material
Nickel silver
Weight
50 g
UHV compatible
No
Suitable for multimode
No
Note

Downloads

Benefits of user registration include

  • Extended information for download including stepfiles, software or manuals
  • Direct download of user-specific downloads (e.g. user-specific software)
  • Access to previous online requests and the possibility to add complete previous lists to the "Request for quote" list
  • Stored item list
Click here to register.

Accessories

9D-12
Screwdriver WS 1.2
50HD-15
Hex key WS 1.5
60EX-4
Eccentric key with a stroke of ± 0.5 mm.
60A19.5-F
Adapter for 60SMS Laser Beam Couplers Flange mount 1"x1"
48MC Combination Cubes
Base unit for multicube™ system. Compatible with established cage and microbech systems.
Adapters for 60SMS, 60SMF, and 60FC-A19.5

with system mount Ø 19.5 mm