Features
Photo detector for monitoring purpose
- Based on photodiode type Osram BPX61
- Clear aperture Ø 2.6 mm
- Spectral range 400 - 1100 nm
- 3° inclined mounting
- System mount Ø 19.5 mm
- Connector type SMA
Description
The photo detector type 48PD-BPX61 is designed to be integrated into the multicube system. With the photo detector you can build a power monitor such as it is used in the Fiber Port Clusters.
The photo detector is based on a Silicon PIN photodiode type OSRAM BPX61 with a spectral range 400 - 1100 nm. Its aperture is Ø 2.6 mm.
In order to avoid back reflection it is mounted with an angle of 3°.
For a linear response you have to short-circuit the photodiode using a resistor. Then the voltage drop is measured along this resistor. The resistance you need for a linear response of the system depends on the optical wavelengh and the optical power level.
The photo diode is delivered without resistor.
As an alternative you also can use a transimpedance amplifier.
Technical data
48PD-BPX61 power monitor
Order Code
48PD-BPX61
Photodiode
Type Osram BPX61
Spectral range
400 - 1100 nm
Clear aperture
Ø 2.6 mm
Inclined mount
3°
Connector
SMA, galvanivcally isolated
System mount
Ø 19.5 mm
Housing material
Nickel silver / steel
Weight
Reverse voltage
32 V
Total power dissipation
250 mW
Spectral sensitivity @ 850 nm
0.62 A/W
Raise/fall time
20 ns
Forward voltage
1.3 V
Capacitance
72 pF
Downloads
Benefits of user registration include
- Extended information for download including stepfiles, software or manuals
- Direct download of user-specific downloads (e.g. user-specific software)
- Access to previous online requests and the possibility to add complete previous lists to the "Request for quote" list
- Stored item list
Related products
Beam splitting plate, in adjustment mount