Vacuum Feed-Throughs V-SF

The fiber cables with vacuum feed-through made by Schäfter+Kirchhoff are equipped with single-mode fiber cables for wavelengths from 360 to 1550 nm. The feed-throughs are suitable for vacuums down to 10^-7 mbar and are supplied with a screw-type flange with thread type M12 x 0.75 mm (nickel silver). It is sealed by a Viton O-ring sealing. Maximum temperature range is -10 °C - 70 °C.

End-to-end fiber cable
All vacuum feed-throughs are supplied with a non-exchangable, continous, end-to-end fiber cable. That means there is no additional fiber connection (mating) at the vacuum flange.
The benefit is no additional coupling losses due to mating (especially important for transmitting short wavelengths)

Single-mode fiber cable
On the vacuum side, the fiber cables are equipped with Ø 900 μm buffer made of Hytrel or Nylon. The part of the fiber cable outside the vacuum, has a Ø 3 mm cable with Kevlar strain-relief with bend protection both at the fiber connector and the flange.
The single-mode fiber cables can be equipped with end caps for reducing the power density at the fiber end-faces.
As an option the connector can be made of amagnetic Titanium (connector type FC only).
The connector outside the vacuum can be core-aligned as an option.

Please refer to the individual SMC fiber cable pages for all fiber options. The connector types are described in detail here. 

How to order
For a specific feed-through please contact Schäfter+Kirchhoff. We additionally need information on:

• Fiber type
• Cable length inside / outside the vacuum
• Connector type inside / outside the vacuum

An example configuration can be found here.